CHAPTER 11 - CANARD ELEVATORS
|Foam ready for CNC milling into canard elevators.||Half-way through the procedure.|
|Finished elevator shapes. They will be lightly sanded.||The torque tube slot neatly cut with a 1" ball router bit.|
|The torque tubes fit perfectly in the elevators.||
The glassed elevators prior to T.E. filling and attachment to the canard.
|Assembled canard tips from AeroCad. Putting these together seemlessly was harder than anticipated.||The canard with tips affixed. The elevators will be attached after the canard surfaces are filled and primed.|